>

Welcome to The Mattress Underground FORUM! :cheer:
The first place to start your research is the Mattress Shopping Tutorial
Select the Search Forum tab below to gain access to answers to many mattress related questions.
Select the Ask An Expert tab below to reach out to any of our Expert Members for guidance and advice.

Welcome to The Mattress Underground FORUM! :cheer:
  • Page:
  • 1

TOPIC:

General questions and assistance comparing value of two mattresses 31 Jan 2012 03:25 #1

  • samssf
  • samssf's Avatar Topic Author
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 10
Hello!

Thanks to the help of all the resources here, I've narrowed down my search fairly well. I'm looking for a Queen size mattress in San Francisco and have a couple places in mind.

First, I went to foamorder.com's store here and lay on a few latex mattresses. Foamorder sells mostly all dunlop mattresses and only sell others on special order. They offer either 6" or 9" thick dunlop in either two or three layers. Over all, I believe that either 3" of medium-firm (around 31 ILD I believe?) over 6" firm (ILD 36), or firm over firm would work fairly well for me. However, the reason I went there is that I had originally chosen some layers on their website (www.foamorder.com/latex.php) and the price was around $1500. But in the store it was about $2000. When I asked about this, they told me it's because their "NaturalSense organic case" is $593, and that I hadn't added that in on the site. They also mentioned that their other diamond pillowtop case option isn't the "organic" one and would have fire retardant added, unless I'm misunderstanding.

My questions about this are 1) Is $500+ a reasonable price for something that will just encase my latex layers? And 2) why would I have to buy an "organic" case to avoid fire retardants? I'd be getting the same latex mattress either way so this is confusing to me. I do want a natural and chemical free bed because I'm very sensitive to scent and offgassing, but don't want to pay a high price for a case unless it's the norm. I just need something simple and can add my own mattress pad or whatnot later for added comfort.


Another place I haven't been to yet but am highly considering is European Sleepworks. Their mattress-only queen is $2000 (www.sleepworks.com/mattresses/8-all-latex) but consists of 2" talalay over 6" dunlop. Since it comes with the case, this would be about the same price as foamorder's (but 1" less latex). However, their "complete system" is more, at $2500.

Right now I just have a mattress on the floor, but I was planning on buying a bedframe that comes with some wooden slats that lie horizontally across the bed (I've had this type of bed before but sold it). Is this enough to support a lone latex mattress like this, or is it necessary to have a special slatted box support or separate box spring mattress? The reason I ask is 1) I want to keep cost as low as possible and invest the most money into the actual mattress and 2) I want my bed to look sleek, since I like the minimal contemporary look.

There's one third option I'd like an opinion on... I haven't yet tried out any pocket spring mattresses that have 1.5 - 2.0" of latex on top. These are much cheaper (check out the Alpine ES at Sleepworks). If I get time to make the trip there I'll check them out, but I'm wondering if anyone else can describe their opinion of the difference in comfort between solid latex and spring + latex, and if the cost is worth an extra 40+%. And does spring + latex still benefit from resistance to dustmites, etc (since they can't penetrate the latex).

Thanks for everything, Phoenix!

Please Log in or Create an account to join the conversation.

Last edit: by samssf.

Re: General questions and assistance comparing value of two mattresses 31 Jan 2012 05:54 #2

  • phoenix
  • phoenix's Avatar
  • Offline
  • Administrator
  • Administrator
  • Posts: 31963
Hi samssf,

Mattresses have to be tested for fire retardancy as a unit with the ticking/quilting to pass the fire code (1633) rather than as component parts. Without passing the code by burning an actual prototype ... the mattress is not legal to sell without a doctors prescription. Compressed wool can be a natural and effective way to pass the code without the use of chemicals or "socks" or "inherent fibers" and is the preferred choice of many people because of this. It is the most natural method of passing the fire code.

The organic ticking/quilting uses wool as the fire retardant and this is what would have been included in the prototype they passed. Without the wool or with a different ticking (like the diamond) ... the mattress probably doesn't pass (quilted latex is much more difficult to pass the burn test) and a different type of fire retardant would have to be used for the mattress to be legally sold without a prescription.

A good quality ticking is one of the most expensive components of a mattress and can be a significant part of the cost of a good quality mattress. This is especially true with more expensive fibers like organic wool and cotton (and others). The more wool that is in it and the higher quality fabrics that are used, the more expensive it will be. A good mattress ticking is an essential part of a mattress though especially with latex which can degrade with exposure to ozone and ultraviolet light and a mattress protector or pad is not enough to protect the latex.

Foam Order's wool layer is thicker than normal which results in a more expensive ticking. (You can see some high quality but lower cost options here and here ). If you go here you will see on their site that the 9" organic mattress includes the organic cover and if you go through the process it's a little less than if you just choose the components. I find their site a little bit confusing sometimes and I have mentioned this to them.

While Form Order has good quality and better value when compared to more typical choices ... they are not in the same value range as some other factory direct manufacturers including some of the online manufacturers that are members of the site who can include either Talalay or Dunlop latex in similar layering with a quilted wool cover for a lower cost. Just in case you haven't seen this ... there is a list of some of the better San Francisco outlets in post #2 here .

Sleepworks is a good choice and if you can take the drive I would also highly recommend you include Bay Bed in your research. They are a member of the site and have great quality and value. They specialize in pocket springs with latex and are also a "component" mattress with a zip cover.

Innersprings, polyfoam, Dunlop latex, or Talalay latex in a support core all have different feels and types of response. Besides the amazing durability of latex support cores ... it has many other advantages including the choices of firmness available (can be better customized), the ability to adapt to different needs and sleeping positions and weights, it's motion separation, it's progressive firmness, and its point elasticity. Of course it is also the most expensive of the mattress cores so for those who want the "feel" of latex in the comfort layers but prefer a lower cost support system, then an innerspring or polyfoam (good quality) with latex in the comfort layers can also be good choices for lower budgets. There are also some who simply prefer the feel and response or "bounciness" of an innerspring and for these it would be a matter of preference.

Latex (especially natural latex) is a natural repellant to dust mites and would be more effective than an innerspring. The lanolin in natural wool is also repellant to dust mites. There are some good dust mite suggestions here (and many other places online although there is conflicting information as well). Of course if dust mite allergies are a real issue then a mattress protector that encases the mattress and has a tight enough weave to keep them from passing through can be an important part of managing allergies.

A latex mattress is heavy and needs a firm unyielding and strong slatted support base (or a tension adjustable slatted base for those who wish to fine tune their mattress this way). If you are putting slats on your bedframe, then it's fine to put the mattress on top of these but they should be very strong, supported in the middle if your mattress is larger than a single, and no more than 3" apart and preferably less ("closer to 2").

Hope this helps and answers all your questions ... so far :)

Phoenix
Researching for a mattress?... Be sure to read The Mattress Shopping Tutorial.
Click here for TMU Discount Codes if purchasing from Our Trusted Members.
For any mattress questions Ask An Expert on our forum

Please Log in or Create an account to join the conversation.

Last edit: by phoenix.

Re: General questions and assistance comparing value of two mattresses 31 Jan 2012 06:20 #3

  • samssf
  • samssf's Avatar Topic Author
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 10
Thanks for the quick reply, Phoenix! That clears up quite a bit, especially about how mattress pads aren't enough to protect latex. Another question I have then is, if I decided to buy a mattress from foam order and get a "less expensive cover/case option elsewhere", wouldn't that be impossible or require foamorder to add the fire retardants since they'd be selling me a mattress without adequate fire protection? I'm assuming so.

I saw your post about outlets in San Francisco, but it seemed all the ones listed weren't as good of a value as foamorder, expect maybe Sleepworks and of course Bay Bed. Bay Bed is a bit far though since I want to pull the trigger soon and hate driving :)

Let me know if you think there's another with better value besides these that I've missed. Also, I hadn't really considering buying online but I can look into that since I think I know what I want, although should probably test out some more locally to be sure. I'm 6'3", 160lbs, tall and lanky. Side sleeper but would like to try sleeping on my back, so I think I want something fairly firm (37 ILD dunlop on the bottom, and 28-31 dunlop or talalay on top, preferably 2" since I'm skinny). Then if I need it softer I can add a mattress pad.

I saw another post of yours mentioning the 6+2 deal at sleepEZ so I'll check that out.

Please Log in or Create an account to join the conversation.

Re: General questions and assistance comparing value of two mattresses 31 Jan 2012 06:48 #4

  • phoenix
  • phoenix's Avatar
  • Offline
  • Administrator
  • Administrator
  • Posts: 31963
Hi samssf,

A quick reply before I'm off to bed :)

Besides the 3 we have mentioned (BayBed, Foam Order, Sleepworks) I would also give Patrick at Community Mattress a call. They are also a bit of a drive away as well but not as far as Santa Cruz and would be worth a call to see what he can offer and if it would be worth the trip.

Phoenix
Researching for a mattress?... Be sure to read The Mattress Shopping Tutorial.
Click here for TMU Discount Codes if purchasing from Our Trusted Members.
For any mattress questions Ask An Expert on our forum

Please Log in or Create an account to join the conversation.

Last edit: by phoenix.
  • Page:
  • 1
The Mattress UndergroundCopyright © 2022 The Mattress Underground
TheMattressUndergounf
TMU
TheMattressUndergounf