>

Welcome to The Mattress Underground FORUM! :cheer:
The first place to start your research is the Mattress Shopping Tutorial
Select the Search Forum tab below to gain access to answers to many mattress related questions.
Select the Ask An Expert tab below to reach out to any of our Expert Members for guidance and advice.

Welcome to The Mattress Underground FORUM! :cheer:
  • Page:
  • 1

TOPIC:

Dual layer budget latex mattresses, which layer wears out first? 29 Apr 2015 07:21 #1

  • mw913
  • mw913's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 2
Hello- I have been shopping and researching for several weeks now and I think I have settled on getting an entry level latex mattress such as Ultimate Dreams or Ikea Myrbacka . Both of these, and many other similarly priced mattresses, consist of a 3" latex top with a 5" to 6" HD foam core. It seems that the latex top would be the expensive component and the foam core fairly generic.

I am wondering which of these two components will be the first to wear out.

If the foam core is likely to be the first to wear out then it would make sense for the two components to be seperate so that I could continue using the more expensive latex top on a new foam core after the first one has worn out. I have looked into buying a foam core via links found at foam outlets , a nice 3" latex top, and a mattress cover. This really doesnt save much money and I was surprised I couldnt find basic HD foam cores that would make this a cost effective way to get a mattress. I would essentially pay the same as the mattresses above and actually the cheapest option would be to put the topper on a discount mattress such as cheap mattress . Odd that it is cheaper to buy a mattress with memory foam and cover than I can buy raw foam. Maybe I've missed something?

I'd prefer to just buy one of the two mattresses linked above and be done with it, but it bothers me that the latex top might be wasted after a couple years because the foam core wears out. Any thoughts on this are appreciated and also any recommendations on lower priced latex topped mattresses.

Thanks,
Max

Please Log in or Create an account to join the conversation.

Dual layer budget latex mattresses, which layer wears out first? 29 Apr 2015 08:17 #2

  • mw913
  • mw913's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 2
Hmm, looks like I missed some good information here post but I am still curious, in general, if the HD core or latex top is more likely to wear out first. I am 5'9" 180

Please Log in or Create an account to join the conversation.

Dual layer budget latex mattresses, which layer wears out first? 29 Apr 2015 09:56 #3

  • phoenix
  • phoenix's Avatar
  • Offline
  • Administrator
  • Administrator
  • Posts: 31974
Hi mw913,

I am wondering which of these two components will be the first to wear out.

I am still curious, in general, if the HD core or latex top is more likely to wear out first. I am 5'9" 180


There is more about the many variables that can affect the durability and useful life of a mattress "as a whole" in post #4 here and the posts it links to.

The latex would be a more durable material than polyfoam if you were sleeping directly on both materials but once you put one on top of the other in a mattress then there are too many variables involved to know how much each one will soften or break down relative to the other one because it will depend on the specifics of each layer, the thickness of each layer, the firmness of each layer, the body type and sleeping style of the person on the mattress, and how sensitive you may be to the foam softening that leads to the loss of comfort and support and the need to replace a mattress. The upper layers of a mattress absorb more of the compression forces of sleeping will tend to soften or break down materials more quickly than the deeper layers but if the deeper layers are also a less durable material then that will also lead to more rapid softening and breakdown than a higher quality and more durable material as well even if it is being compressed less. In a perfect world the durability of both layers will be "balanced".

In most cases neither layer will be "worn out" completely and will both contribute to different degrees to the loss of comfort/support that leads to the need to replace a mattress but how much each layer will contribute individually for any specific person isn't really possible to predict with any accuracy.

I have looked into buying a foam core via links found at foam outlets, a nice 3" latex top, and a mattress cover. This really doesnt save much money and I was surprised I couldnt find basic HD foam cores that would make this a cost effective way to get a mattress. I would essentially pay the same as the mattresses above and actually the cheapest option would be to put the topper on a discount mattress such as cheap mattress. Odd that it is cheaper to buy a mattress with memory foam and cover than I can buy raw foam. Maybe I've missed something?


It's often the case that a DIY mattress won't save much money (if it saves you anything at all) vs a good quality/value "finished" mattress that would be an "apples to apples" comparison. If you are attracted to the idea of designing and building your own mattress out of separate components and a separate cover then the first place I would start is by reading option 3 in post #15 here and the posts it links to (and option #1 and #2 as well) so that you have more realistic expectations and that you are comfortable with the learning curve, uncertainty, trial and error, or in some cases the higher costs that may be involved in the DIY process. While it can certainly be a rewarding project ... the best approach to a DIY mattress is a "spirit of adventure" where what you learn and the satisfaction that comes from the process itself is more important than any cost savings you may realize (which may or may not happen).

I'd prefer to just buy one of the two mattresses linked above and be done with it, but it bothers me that the latex top might be wasted after a couple years because the foam core wears out. Any thoughts on this are appreciated and also any recommendations on lower priced latex topped mattresses.


While there is no way to quantify how long any mattress will last for any particular person because there are too many unknowns and variables involved that are unique to each person, if a mattress is well inside a suitable comfort/support range and isn't close to the edge of being too soft when it is new and meets the minimum quality specs that are suggested in the guidelines here then it would be reasonable to expect a useful lifetime in the range of 7 - 10 years and with higher quality and more durable materials like latex or higher density memory foam or polyfoam (in the comfort layers especially) it would likely be in the higher end of the range or even longer.

You can see my thoughts about buying a mattress/topper combination in post #2 here . If you decide to go in this direction then I would make sure that there isn't too much lower quality/density soft foam or other materials in your base mattress which could significantly shorten the life of the combination.

Once your mattress needs to be replaced then if the latex is still in good condition you would still have the option of mattress surgery where you could replace the polyfoam support core and add a new cover (see post #2 here )

Some of the better lower budget latex and latex hybrid options I'm aware of are listed in posts #3 and #4 here .

There is also more about the most important parts of the "value" of a mattress purchase in post #13 here that can help you make more meaningful quality/value comparisons between mattresses but PPP (Posture and alignment, Pressure relief, and Personal preferences) is always the most important followed by the durability and useful life of the mattress followed by all the other criteria that are the most important parts of your personal value equation.

Phoenix
Researching for a mattress?... Be sure to read The Mattress Shopping Tutorial.
Click here for TMU Discount Codes if purchasing from Our Trusted Members.
For any mattress questions Ask An Expert on our forum

Please Log in or Create an account to join the conversation.

Last edit: by phoenix.
  • Page:
  • 1
The Mattress UndergroundCopyright © 2022 The Mattress Underground
TheMattressUndergounf
TMU
TheMattressUndergounf